Skip to main content

member-ordering

Require a consistent member declaration order.

This rule aims to standardize the way classes, interfaces, and type literals are structured and ordered. A consistent ordering of fields, methods and constructors can make code easier to read, navigate, and edit.

.eslintrc.cjs
module.exports = {
"rules": {
"@typescript-eslint/member-ordering": "warn"
}
};

Options

interface Options {
default?: OrderConfig;
classes?: OrderConfig;
classExpressions?: OrderConfig;
interfaces?: OrderConfig;
typeLiterals?: OrderConfig;
}

type OrderConfig = MemberType[] | SortedOrderConfig | 'never';

interface SortedOrderConfig {
memberTypes?: MemberType[] | 'never';
order:
| 'alphabetically'
| 'alphabetically-case-insensitive'
| 'as-written'
| 'natural'
| 'natural-case-insensitive';
}

// See below for the more specific MemberType strings
type MemberType = string | string[];

You can configure OrderConfig options for:

  • default: all constructs (used as a fallback)
  • classes?: override ordering specifically for classes
  • classExpressions?: override ordering specifically for class expressions
  • interfaces?: override ordering specifically for interfaces
  • typeLiterals?: override ordering specifically for type literals

The OrderConfig settings for each kind of construct may configure sorting on one or both two levels:

  • memberTypes: organizing on member type groups such as methods vs. properties
  • order: organizing based on member names, such as alphabetically

Groups

You can define many different groups based on different attributes of members. The supported member attributes are, in order:

  • Accessibility ('public' | 'protected' | 'private')
  • Decoration ('decorated'): Whether the member has an explicit accessibility decorator
  • Kind ('call-signature' | 'constructor' | 'field' | 'get' | 'method' | 'set' | 'signature')

Member attributes may be joined with a '-' to combine into more specific groups. For example, 'public-field' would come before 'private-field'.

Orders

The order value specifies what order members should be within a group. It defaults to as-written, meaning any order is fine. Other allowed values are:

  • alphabetically: Sorted in a-z alphabetical order, directly using string < comparison (so B comes before a)
  • alphabetically-case-insensitive: Sorted in a-z alphabetical order, ignoring case (so a comes before B)
  • natural: Same as alphabetically, but using natural-compare-lite for more friendly sorting of numbers
  • natural-case-insensitive: Same as alphabetically-case-insensitive, but using natural-compare-lite for more friendly sorting of numbers

Default configuration

The default configuration looks as follows:

{
"default": [
// Index signature
"signature",

// Fields
"public-static-field",
"protected-static-field",
"private-static-field",

"public-decorated-field",
"protected-decorated-field",
"private-decorated-field",

"public-instance-field",
"protected-instance-field",
"private-instance-field",

"public-abstract-field",
"protected-abstract-field",
"private-abstract-field",

"public-field",
"protected-field",
"private-field",

"static-field",
"instance-field",
"abstract-field",

"decorated-field",

"field",

// Static initialization
"static-initialization",

// Constructors
"public-constructor",
"protected-constructor",
"private-constructor",

"constructor",

// Getters
"public-static-get",
"protected-static-get",
"private-static-get",

"public-decorated-get",
"protected-decorated-get",
"private-decorated-get",

"public-instance-get",
"protected-instance-get",
"private-instance-get",

"public-abstract-get",
"protected-abstract-get",
"private-abstract-get",

"public-get",
"protected-get",
"private-get",

"static-get",
"instance-get",
"abstract-get",

"decorated-get",

"get",

// Setters
"public-static-set",
"protected-static-set",
"private-static-set",

"public-decorated-set",
"protected-decorated-set",
"private-decorated-set",

"public-instance-set",
"protected-instance-set",
"private-instance-set",

"public-abstract-set",
"protected-abstract-set",
"private-abstract-set",

"public-set",
"protected-set",
"private-set",

"static-set",
"instance-set",
"abstract-set",

"decorated-set",

"set",

// Methods
"public-static-method",
"protected-static-method",
"private-static-method",

"public-decorated-method",
"protected-decorated-method",
"private-decorated-method",

"public-instance-method",
"protected-instance-method",
"private-instance-method",

"public-abstract-method",
"protected-abstract-method",
"private-abstract-method",

"public-method",
"protected-method",
"private-method",

"static-method",
"instance-method",
"abstract-method",

"decorated-method",

"method"
]
}
note

The default configuration contains member group types which contain other member types. This is intentional to provide better error messages.

tip

By default, the members are not sorted. If you want to sort them alphabetically, you have to provide a custom configuration.

Examples

General Order on All Constructs

This config specifies the order for all constructs. It ignores member types other than signatures, methods, constructors, and fields. It also ignores accessibility and scope.

// .eslintrc.json
{
"rules": {
"@typescript-eslint/member-ordering": [
"error",
{ "default": ["signature", "method", "constructor", "field"] }
]
}
}
interface Foo {
B: string; // -> field

new (); // -> constructor

A(): void; // -> method

[Z: string]: any; // -> signature
}
type Foo = {
B: string; // -> field

// no constructor

A(): void; // -> method

// no signature
};
class Foo {
private C: string; // -> field
public D: string; // -> field
protected static E: string; // -> field

constructor() {} // -> constructor

public static A(): void {} // -> method
public B(): void {} // -> method

[Z: string]: any; // -> signature
}
const Foo = class {
private C: string; // -> field
public D: string; // -> field

constructor() {} // -> constructor

public static A(): void {} // -> method
public B(): void {} // -> method

[Z: string]: any; // -> signature

protected static E: string; // -> field
};

Classes

Public Instance Methods Before Public Static Fields

This config specifies that public instance methods should come first before public static fields. Everything else can be placed anywhere. It doesn't apply to interfaces or type literals as accessibility and scope are not part of them.

// .eslintrc.json
{
"rules": {
"@typescript-eslint/member-ordering": [
"error",
{ "default": ["public-instance-method", "public-static-field"] }
]
}
}
class Foo {
private C: string; // (irrelevant)

public D: string; // (irrelevant)

public static E: string; // -> public static field

constructor() {} // (irrelevant)

public static A(): void {} // (irrelevant)

[Z: string]: any; // (irrelevant)

public B(): void {} // -> public instance method
}
const Foo = class {
private C: string; // (irrelevant)

[Z: string]: any; // (irrelevant)

public static E: string; // -> public static field

public D: string; // (irrelevant)

constructor() {} // (irrelevant)

public static A(): void {} // (irrelevant)

public B(): void {} // -> public instance method
};

Static Fields Before Instance Fields

This config specifies that static fields should come before instance fields, with public static fields first. It doesn't apply to interfaces or type literals as accessibility and scope are not part of them.

{
"rules": {
"@typescript-eslint/member-ordering": [
"error",
{ "default": ["public-static-field", "static-field", "instance-field"] }
]
}
}
class Foo {
private E: string; // -> instance field

private static B: string; // -> static field
protected static C: string; // -> static field
private static D: string; // -> static field

public static A: string; // -> public static field

[Z: string]: any; // (irrelevant)
}
const foo = class {
public T(): void {} // method (irrelevant)

private static B: string; // -> static field

constructor() {} // constructor (irrelevant)

private E: string; // -> instance field

protected static C: string; // -> static field
private static D: string; // -> static field

[Z: string]: any; // signature (irrelevant)

public static A: string; // -> public static field
};

Class Declarations

This config only specifies an order for classes: methods, then the constructor, then fields. It does not apply to class expressions (use classExpressions for them). Default settings will be used for class declarations and all other syntax constructs other than class declarations.

// .eslintrc.json
{
"rules": {
"@typescript-eslint/member-ordering": [
"error",
{ "classes": ["method", "constructor", "field"] }
]
}
}
class Foo {
private C: string; // -> field
public D: string; // -> field
protected static E: string; // -> field

constructor() {} // -> constructor

public static A(): void {} // -> method
public B(): void {} // -> method
}

Class Expressions

This config only specifies an order for classes expressions: methods, then the constructor, then fields. It does not apply to class declarations (use classes for them). Default settings will be used for class declarations and all other syntax constructs other than class expressions.

// .eslintrc.json
{
"rules": {
"@typescript-eslint/member-ordering": [
"error",
{ "classExpressions": ["method", "constructor", "field"] }
]
}
}
const foo = class {
private C: string; // -> field
public D: string; // -> field
protected static E: string; // -> field

constructor() {} // -> constructor

public static A(): void {} // -> method
public B(): void {} // -> method
};

Interfaces

This config only specifies an order for interfaces: signatures, then methods, then constructors, then fields. It does not apply to type literals (use typeLiterals for them). Default settings will be used for type literals and all other syntax constructs other than class expressions.

note

These member types are the only ones allowed for interfaces.

// .eslintrc.json
{
"rules": {
"@typescript-eslint/member-ordering": [
"error",
{ "interfaces": ["signature", "method", "constructor", "field"] }
]
}
}
interface Foo {
B: string; // -> field

new (); // -> constructor

A(): void; // -> method

[Z: string]: any; // -> signature
}

Type Literals

This config only specifies an order for type literals: signatures, then methods, then constructors, then fields. It does not apply to interfaces (use interfaces for them). Default settings will be used for interfaces and all other syntax constructs other than class expressions.

note

These member types are the only ones allowed for typeLiterals.

// .eslintrc.json
{
"rules": {
"@typescript-eslint/member-ordering": [
"error",
{ "typeLiterals": ["signature", "method", "constructor", "field"] }
]
}
}
type Foo = {
B: string; // -> field

A(): void; // -> method

new (); // -> constructor

[Z: string]: any; // -> signature
};

Sorting Options

Sorting Alphabetically Within Member Groups

This config specifies that within each memberTypes group, members are in an alphabetic case-sensitive order. You can copy and paste the default order from Default Configuration.

// .eslintrc.json
{
"rules": {
"@typescript-eslint/member-ordering": [
"error",
{
"default": {
"memberTypes": [
/* <Default Order> */
],
"order": "alphabetically"
}
}
]
}
}
interface Foo {
a: x;
B: x;
c: x;

B(): void;
c(): void;
a(): void;
}

Sorting Alphabetically Case Insensitive Within Member Groups

This config specifies that within each memberTypes group, members are in an alphabetic case-sensitive order. You can copy and paste the default order from Default Configuration.

// .eslintrc.json
{
"rules": {
"@typescript-eslint/member-ordering": [
"error",
{
"default": {
"memberTypes": [
/* <Default Order> */
],
"order": "alphabetically-case-insensitive"
}
}
]
}
}
interface Foo {
B: x;
a: x;
c: x;

B(): void;
c(): void;
a(): void;
}

Sorting Alphabetically Ignoring Member Groups

This config specifies that members are all sorted in an alphabetic case-sensitive order. It ignores any member group types completely by specifying "never" for memberTypes.

// .eslintrc.json
{
"rules": {
"@typescript-eslint/member-ordering": [
"error",
{ "default": { "memberTypes": "never", "order": "alphabetically" } }
]
}
}
interface Foo {
static c = 0;
b(): void;
a: boolean;

[a: string]: number; // Order doesn't matter (no sortable identifier)
new (): Bar; // Order doesn't matter (no sortable identifier)
(): Baz; // Order doesn't matter (no sortable identifier)
}

All Supported Options

Member Types (Granular Form)

There are multiple ways to specify the member types. The most explicit and granular form is the following:

[
// Index signature
"signature",

// Fields
"public-static-field",
"protected-static-field",
"private-static-field",
"public-decorated-field",
"protected-decorated-field",
"private-decorated-field",
"public-instance-field",
"protected-instance-field",
"private-instance-field",
"public-abstract-field",
"protected-abstract-field",
"private-abstract-field",

// Static initialization
"static-initialization",

// Constructors
"public-constructor",
"protected-constructor",
"private-constructor",

// Getters
"public-static-get",
"protected-static-get",
"private-static-get",

"public-decorated-get",
"protected-decorated-get",
"private-decorated-get",

"public-instance-get",
"protected-instance-get",
"private-instance-get",

"public-abstract-get",
"protected-abstract-get",
"private-abstract-get",

"public-get",
"protected-get",
"private-get",

"static-get",
"instance-get",
"abstract-get",

"decorated-get",

"get",

// Setters
"public-static-set",
"protected-static-set",
"private-static-set",

"public-decorated-set",
"protected-decorated-set",
"private-decorated-set",

"public-instance-set",
"protected-instance-set",
"private-instance-set",

"public-abstract-set",
"protected-abstract-set",
"private-abstract-set",

"public-set",
"protected-set",
"private-set",

"static-set",
"instance-set",
"abstract-set",

"decorated-set",

"set",

// Methods
"public-static-method",
"protected-static-method",
"private-static-method",
"public-decorated-method",
"protected-decorated-method",
"private-decorated-method",
"public-instance-method",
"protected-instance-method",
"private-instance-method",
"public-abstract-method",
"protected-abstract-method",
"private-abstract-method"
]
note

If you only specify some of the possible types, the non-specified ones can have any particular order. This means that they can be placed before, within or after the specified types and the linter won't complain about it.

Member Group Types (With Accessibility, Ignoring Scope)

It is also possible to group member types by their accessibility (static, instance, abstract), ignoring their scope.

[
// Index signature
// No accessibility for index signature.

// Fields
"public-field", // = ["public-static-field", "public-instance-field"]
"protected-field", // = ["protected-static-field", "protected-instance-field"]
"private-field", // = ["private-static-field", "private-instance-field"]

// Static initialization
// No accessibility for static initialization.

// Constructors
// Only the accessibility of constructors is configurable. See below.

// Getters
"public-get", // = ["public-static-get", "public-instance-get"]
"protected-get", // = ["protected-static-get", "protected-instance-get"]
"private-get", // = ["private-static-get", "private-instance-get"]

// Setters
"public-set", // = ["public-static-set", "public-instance-set"]
"protected-set", // = ["protected-static-set", "protected-instance-set"]
"private-set", // = ["private-static-set", "private-instance-set"]

// Methods
"public-method", // = ["public-static-method", "public-instance-method"]
"protected-method", // = ["protected-static-method", "protected-instance-method"]
"private-method" // = ["private-static-method", "private-instance-method"]
]

Member Group Types (With Accessibility and a Decorator)

It is also possible to group methods or fields with a decorator separately, optionally specifying their accessibility.

[
// Index signature
// No decorators for index signature.

// Fields
"public-decorated-field",
"protected-decorated-field",
"private-decorated-field",

"decorated-field", // = ["public-decorated-field", "protected-decorated-field", "private-decorated-field"]

// Static initialization
// No decorators for static initialization.

// Constructors
// There are no decorators for constructors.

// Getters
"public-decorated-get",
"protected-decorated-get",
"private-decorated-get",

"decorated-get", // = ["public-decorated-get", "protected-decorated-get", "private-decorated-get"]

// Setters
"public-decorated-set",
"protected-decorated-set",
"private-decorated-set",

"decorated-set", // = ["public-decorated-set", "protected-decorated-set", "private-decorated-set"]

// Methods
"public-decorated-method",
"protected-decorated-method",
"private-decorated-method",

"decorated-method" // = ["public-decorated-method", "protected-decorated-method", "private-decorated-method"]
]

Member Group Types (With Scope, Ignoring Accessibility)

Another option is to group the member types by their scope (public, protected, private), ignoring their accessibility.

[
// Index signature
// No scope for index signature.

// Fields
"static-field", // = ["public-static-field", "protected-static-field", "private-static-field"]
"instance-field", // = ["public-instance-field", "protected-instance-field", "private-instance-field"]
"abstract-field", // = ["public-abstract-field", "protected-abstract-field", "private-abstract-field"]

// Static initialization
// No scope for static initialization.

// Constructors
"constructor", // = ["public-constructor", "protected-constructor", "private-constructor"]

// Getters
"static-get", // = ["public-static-get", "protected-static-get", "private-static-get"]
"instance-get", // = ["public-instance-get", "protected-instance-get", "private-instance-get"]
"abstract-get", // = ["public-abstract-get", "protected-abstract-get", "private-abstract-get"]

// Setters
"static-set", // = ["public-static-set", "protected-static-set", "private-static-set"]
"instance-set", // = ["public-instance-set", "protected-instance-set", "private-instance-set"]
"abstract-set", // = ["public-abstract-set", "protected-abstract-set", "private-abstract-set"]

// Methods
"static-method", // = ["public-static-method", "protected-static-method", "private-static-method"]
"instance-method", // = ["public-instance-method", "protected-instance-method", "private-instance-method"]
"abstract-method" // = ["public-abstract-method", "protected-abstract-method", "private-abstract-method"]
]

Member Group Types (With Scope and Accessibility)

The third grouping option is to ignore both scope and accessibility.

[
// Index signature
// No grouping for index signature.

// Fields
"field", // = ["public-static-field", "protected-static-field", "private-static-field", "public-instance-field", "protected-instance-field", "private-instance-field",
// "public-abstract-field", "protected-abstract-field", private-abstract-field"]

// Static initialization
// No grouping for static initialization.

// Constructors
// Only the accessibility of constructors is configurable.

// Getters
"get", // = ["public-static-get", "protected-static-get", "private-static-get", "public-instance-get", "protected-instance-get", "private-instance-get",
// "public-abstract-get", "protected-abstract-get", "private-abstract-get"]

// Setters
"set", // = ["public-static-set", "protected-static-set", "private-static-set", "public-instance-set", "protected-instance-set", "private-instance-set",
// "public-abstract-set", "protected-abstract-set", "private-abstract-set"]

// Methods
"method" // = ["public-static-method", "protected-static-method", "private-static-method", "public-instance-method", "protected-instance-method", "private-instance-method",
// "public-abstract-method", "protected-abstract-method", "private-abstract-method"]
]

Grouping Different Member Types at the Same Rank

It is also possible to group different member types at the same rank.

[
// Index signature
"signature",

// Fields
"field",

// Static initialization
"static-initialization",

// Constructors
"constructor",

// Getters and Setters at the same rank
["get", "set"],

// Methods
"method"
]

When Not To Use It

If you don't care about the general order of your members, then you will not need this rule.

Resources